Product Return Policy and Guidelines

Wrong Filter?

If, for whatever reason, you received a different model or configuration of water filter or other product offered by ESD, please get in touch with us immediately. If the error was that you mistakenly entered the wrong model number on your order, we’ll work with you to get what you meant to order to you with the least amount of hassle and expense.

If it was the manufacturer’s shipping error and you were sent something other than what you ordered, we’ll have that manufacturer issue a “call tag” to pay for the return of the wrong filter at the time carrier (either UPS or FedEx) delivers the correct filter. It’s a pre-paid shipping lable, so all you need to do is hand over the re-boxed filter (tape it up good, please) and off it goes. You won’t be out anything other than the inconvenience of the delay to get it right. It’s a rare thing, but we’re here to straighten out any sort of tangle like that.

 

Leaking Filter

Like the ambiguous term “water filter” (that can be a dozen different types of filter), a “leaking” water filter may or may not be leaking from the water filter. Honestly, that’s not said to be intentionally confusing. We regularly encounter filters returned to the manufacturer for “leaking” only to discover that it wasn’t the filter that was leaking at all, it was the connection between the water line and the fitting on the water filter.

A filter that is reported to be leaking and returned to the manufacturer will be bench tested. This is done by applying a high pressure air hose to the filter — MUCH higher pressure than your household water pressure puts on the filter. The filter is submerged in a lab sink of water and the air is pumped into the filter inlet fitting with the outlet fitting plugged. If there’s a leak in the filter itself, it’ll shoot a stream of air bubbles out the point where the leak would occur.

But, with approximately 20-30% of filters returned for leaking, the filter is found to be solid. No leaks evidenced by the pressure test. Which leaves only the conclusion that the leak the customer was seeing was happening at the connection of either the inlet or outlet water line. And in truth, that’s the most likely suspect.

So, if the manufacturer verifies that the filter is solid, no leaks, they will ship it back to you, charging you only the actual shipping cost. But here’s the thing. You will have paid for the shipping TO the manufacturer as well as the shipping FROM the manufacturer back to you, all for naught. [Note: if the manufacturer determines that the filter does, in fact, have a leak in it, you will be reimbursed for the cost to ship the filter to the manufacturer and the manufacturer will cover the cost of shipping a new replacement filter back to you.]

In short, it pays to be sure that the leak is coming from the filter and not the connection or somewhere else before you send it in for inspection and warranty claim. It can sometimes be a little tricky to tell. If you’re not really sure where the leak is coming from, it might even be a savings to hire a plumber or handyman to check it out. If it’s a leaky connection, that’s an easy fix and whatever you pay that plumber/handyman for stopping the leak would surely cost less than shipping a perfectly good filter back and forth to/from the manufacturer.

That’s said in the spirit of trying to help you rectify the problem in the most economic and hassle-free way, not to try and dodge our responsibility to you for top-notch customer service. If the filter itself has actually sprung a leak, and if it’s still under warranty, we’ll do everything in our power to do you right.

 

Obvious Damage or Material Failure (e.g., a crack in the dome)

If the cause of the leak is something glaringly obvious, like a crack in the dome of the filter or water bubbling up at a seam — either where the body of the filter is welded to the domed cap or where the body is welded to the base — the best thing to do is to snap a picture of it and send it to us. Knowing up front and with certainty what we’re dealing with will help us speed along the process of getting your filter replaced by the manufacturer.

Here’s an excellent example of that as submitted by a recent customer. This turned out to be due to rough handling by the carrier (shipping damage).

 

Warranty Period

Check the warranty card that came with your original purchase of the water filter. Different models of filters can have different warranty periods. Do note that the warranty is prorated, meaning that the dollar figure listed as warranty value for your model of filter is the amount your water filter will be reduced in value for each month of good service you got from it.

Note also that the warranty period begins on the date of purchase, not the date of installation. If you buy a water filter and decide to not install it for two years, and then discover that it is defective or was damaged in shipping, you very likely will discover that the warranty value has been reduced to zero. Installed immediately upon receipt or otherwise, please know that the manufacturer’s warranty will deal only with the purchase date.

 

Lastly, please always get in touch with us before sending a filter back to the manufacturer for any reason. If we can’t help you fix it, we at least need to notify the manufacturer that it is on its way to them.